Sewing Machine Presser Feet
How to check whether a presser foot fits your sewing machine
The quickest check starts with the machine’s exact model. The mount, the stitch you plan to use, and any separate holder decide which foot to buy.
Read the model before measuring the mount
Find the model on the machine label or in its manual and keep the letters at the end. Search the maker’s accessory list for that model and the part number. If the foot clips onto an existing holder, confirm the holder and the pin match. For a foot that attaches directly to the presser bar, check the mounting height and the specified attachment.
Keep stitch width separate from mounting height
Janome uses both maximum stitch width and mounting height in its accessory guide. A foot described as 9 mm still needs the correct mount and a supported model. When the machine has an integrated feed system, check whether the foot needs its single holder, twin holder, or a different attachment entirely.
Check the stitch you actually need
Read the accessory instructions and the machine’s presser-foot table together. A small straight-stitch opening and a wide zigzag call for different clearances. Before stitching, follow the manual’s procedure to verify that the needle can clear the opening at the selected position and width.